1. Emergency monitoring and inspection
Field surveys and measurements in the field of emergency response and disaster investigation are often complex due to practical constraints and environmental hazards.
However, with the
rangefinder altimeter, the operation is very simple and it is very convenient to carry. It is an excellent mobile detection device. You can perform a variety of measurement tasks away from hazardous areas without being in a dangerous situation.
In terms of disaster prevention or disaster, ranging, height measurement, whether it is height measurement of dangerous areas, wading engineering size measurement, river/ditch longitudinal section measurement, flood control, mountain torrent ditch foundation measurement, etc.; or emergency response when disasters occur Surveys, or damage investigations on dams/bridges etc., can be done from just one point, faster and more advantageous than traditional surveying methods.
2. Soil and water conservation monitoring
In soil and water conservation monitoring and slope management, facing some landslide-prone areas, there is a huge potential safety hazard for people to measure the slope near the slope. Using a rangefinder altimeter, one can enter major danger areas with a simple two triggers. solve this problem.
When measuring, use the span-to-point (ML) measurement function to measure only one point at the top and bottom of the slope in the same vertical plane. The slope value of the slope can be quickly obtained, which can be displayed in degrees or percentages.
Using laser ranging acquisition and mapping software, the volume and area of earthwork can be quickly and immediately measured. After the measurement is completed, the calculated data of earthwork volume/area is available in a few minutes.
